EcoxGear ExtremeSound Marine Gauge Radio and 6.5″ Speaker Kit
The SoundExtreme Marine Gauge Size Radio is the first radio with a built-in LED controller, allowing you to connect the included 6.5-inch wired speakers and millions of EcoCast-enabled products. It is 100% waterproof, sand, and mud-proof. Perfect for boats, ATVs/UTVs, golf carts, and RVs.
Key Features:
RADIO
- 200W Peak Output: 25 watts x 4 channels RMS with built-in 3-band equalizer and optional volume limiter controls.
- Customize your audio experience with 1 or 2 wired audio zones and 1 wireless audio zone.
- Change zone volume independently or together, and rename zones.
- EcoCast Enabled: Stream Bluetooth music, AM/FM radio, and AUX-In audio to EcoCast-enabled products.
- LEDCast Enabled: Connect LEDCast wired speakers and control the LEDs directly from the radio’s display.
- Create up to 4 LED zones and control them independently or simultaneously.
- Optional LEDCast strips and whips can be controlled from the radio.
- High Contrast Display: Daylight-viewable 2.3-inch white LCD display.
- Low Battery Voltage Alarm: Notifies when vehicle battery voltage is low.
- Waterproof and UV Resistant: Meets IP66 standards for saltwater, freshwater, mud, sand, or snow.
- RF Remote Control: Control audio and lighting remotely with the included RF remote.
- Smartphone SoundExtreme App: Customize LED colors, speed, brightness, music sync, and LED chasing.
SPEAKERS
- 2-way dual marine-grade IP66 cone speakers with black or white grills.
- Built-in addressable RGB LEDs with millions of colors, fading, jumping, chasing, and variable brightness.
- 1.5″ titanium tweeter with double Neodymium magnet design.
- 6.5″ low and mid-range woofer.
- Built-in two-way crossover network.
- UV-protected polypropylene carbon fiber blend woofer with Santoprene rubber surround.
- Waterproof audio and LEDCast jacks for corrosion-free connections.
- Acrylic Styrene Acrylonitrile (ASA) enclosures for UV resistance and IP66 waterproof rating.
- Salt corrosion-resistant 316 stainless screws and aluminum alloy mounts included.
Specifications:
Radio
- Unit Weight: 0.61kg
- Dimensions: 11.6 x 10.9 x 14.9cm
- Power Input: 12V, 30A (Range: 10.5V – 16VDC)
- Remote Turn-On Input Voltage: 12 – 56VDC
- Power Input in-line Blade Fuse: 35A, 32V
- Display: 2.3” Full Dot Matrix LCD
- RF Remote Control Frequency: 433 MHz
- Audio Source: Bluetooth, FM, AM, Aux In, and EcoCast streaming
- Bluetooth: 5.1v
- Bluetooth Frequency Band: 2.402~2.480GHz ISM Spectrum
- Bluetooth Range: Up to 30m
- EcoCast Range: 9.1m between transmitting and receiving speakers
- FM Radio Tuner Frequency: Australia 87.5 – 108MHz
- AM Radio Tuner Frequency: Australia 522 – 1710KHz
- Radio Tuner Presets: 20 FM and 20 AM
- Aux In Input Gain Adjustable: ±9dB
- Audio Output Zones: 2 wired Zones and 1 wireless (EcoCast) Zone
- LEDCast-Enabled: Built-in LEDCast lighting controller with 4 control outputs (only compatible with LEDCast-enabled products).
- Audio Outputs: 2 Zone (4 channel) speaker outputs (25 W X 4 RMS, 50 W x 4 max @ 4 Ohms), 2 Zone pre-amplified RCA outputs, 1 subwoofer pre-amplified RCA output, Amp-On signal output (12V, 200mA max).
Speaker
- Weight: 1.04 kg
- Width: 176mm Diameter Grill (130mm diameter body)
- Height: 176mm Diameter Grill (130mm diameter body)
- Depth: 96mm (31mm flush-mount depth)
- Power Output: 200 Watt peak (65 Watt RMS)
- Tweeter: 1.5″ (38mm) tweeter, 4 ohms
- Frequency Response (Tweeter): 2.2KHz ~ 20KHz
- Sensitivity: 92dB ± 3dB @ 1W/1m
- Woofer: 6.5″ (165mm) low and mid-range woofer, 4 ohms
- Frequency Response (Woofer): 75Hz ~ 5KHz
- Sensitivity: 89dB ± 3dB @ 1W/1m
- Built-in two-way crossover network
- Speaker LEDs: Addressable RGB LEDs
- Storage Temperature: -40°F to 122°F (-40°C to 50°C)
- Operating Temperature: 23°F to 95°F (-5°C to 35°C)
